کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1294669 | 973633 | 2008 | 7 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: (La0.74Bi0.10Sr0.16)MnO3−δ–(Bi2O3)0.7(Er2O3)0.3 composite cathodes for intermediate temperature solid oxide fuel cells (La0.74Bi0.10Sr0.16)MnO3−δ–(Bi2O3)0.7(Er2O3)0.3 composite cathodes for intermediate temperature solid oxide fuel cells](/preview/png/1294669.png)
(La0.74Bi0.10Sr0.16)MnO3−δ (LBSM)–(Bi2O3)0.7(Er2O3)0.3(ESB) composite cathodes were fabricated for intermediate-temperature solid oxide fuel cells with Sc-stabilized zirconia as the electrolyte. The performance of these cathodes was investigated at temperatures below 750 °C by AC impedance spectroscopy and the results indicated that LBSM–ESB had a better performance than traditional composite electrodes such as LSM–GDC and LSM–YSZ. At 750 °C, the lowest interfacial polarization resistance was only 0.11 Ω cm2 for the LBSM–ESB cathode, 0.49 Ω cm2 for the LSM–GDC cathode, and 1.31 Ω cm2 for the LSM–YSZ cathode. The performance of the cathode was improved gradually by increasing the ESB content, and the performance was optimal when the amounts of LBSM and ESB were equal in composite cathodes. This study shows that the sintering temperature of the cathode affected performance, and the optimum sintering temperature for LBSM–ESB was 900 °C.
Journal: Journal of Power Sources - Volume 179, Issue 2, 1 May 2008, Pages 474–480