کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1296484 | 973781 | 2011 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Dip coating fabrication process for micro-tubular SOFCs
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
الکتروشیمی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This study investigates the dip coating fabrication process in detail. First the slurry formulation development is presented. This includes optimizing the concentration of slurry components. Controlling the coating thickness is then addressed. It is shown that a broad range of uniform thicknesses from a few microns up to a few hundreds of microns is achievable by adjusting the solid loading and/or the dip coating rate. This study reports that dip coating is a commercially reliable technique to fabricate micro-tubular solid oxide fuel cells not only because it is low cost but, more importantly, because it is fairly reproducible and highly controllable.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Solid State Ionics - Volume 192, Issue 1, 16 June 2011, Pages 372–375
Journal: Solid State Ionics - Volume 192, Issue 1, 16 June 2011, Pages 372–375
نویسندگان
Alireza Torabi, Thomas H. Etsell, Partha Sarkar,