کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1298741 | 1498371 | 2008 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fabrication and performance test of a catalyst-coated membrane from direct spray deposition
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
الکتروشیمی
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Catalyst-coated membranes (CCMs) play an important role in the PEMFCs. The direct-spraying deposition method that is using ethylene-glycol (EG) soaked Nafion membrane and the catalyst ink with isopropyl alcohol as the primary liquid media and small amount of EG as additive has been developed for fabrication of high-quality CCMs. The properties of the CCMs have been analyzed by SEM, I–V and EIS characterization. Both modification of catalyst layers and membrane surfaces with Nafion had significant impacts on the cell performance. On favorable conditions, a peak power density of ~ 430mW/cm2 could be achieved for a H2|O2 cell at ambient pressure and total Pt loading of 0.3mg/cm2 including both the anode and cathode.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Solid State Ionics - Volume 179, Issues 21–26, 15 September 2008, Pages 960–965
Journal: Solid State Ionics - Volume 179, Issues 21–26, 15 September 2008, Pages 960–965
نویسندگان
Liangliang Sun, Ran Ran, Guixing Wang, Zongping Shao,