کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
13441262 | 1843403 | 2020 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Abrasion resistance of Ni-Cr-B-Si coating deposited by laser cladding process
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Ni-Cr-B-Si alloy deposited by laser cladding has its tribological performance evaluated. Deposition parameters selection is a difficult task. In this work, Ni-Cr-B-Si coatings were deposited by a fiber laser source with a coaxial powder nozzle on low carbon steel substrate. Microstructure, microhardness and abrasive wear tests were performed. Results showed coatings with good surface adhesion. Microhardness was 10% higher in coatings with higher concentration and phase size of chromium carbides. Volumetric loss and wear coefficient showed 10% variation between the coatings. Coatings with different thermal gradients showed different dilution levels, affecting their abrasion resistance. The better tribological performance was obtained for coatings with lower cooling cracks density and higher volumetric fraction of carbides, which both mitigated wear micromechanism action.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 143, March 2020, 106002
Journal: Tribology International - Volume 143, March 2020, 106002
نویسندگان
Jurandir Marcos Sá de Sousa, Francisco Ratusznei, Milton Pereira, Richard de Medeiros Castro, Elvys IsaÃas Mercado Curi,