کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1441763 | 1509426 | 2011 | 6 صفحه PDF | دانلود رایگان |
Schottky diode based on 6,13 bis (triisopropylsilylethynyle) (TIPS) pentacene was fabricated using spin coating. The junction properties and photoconductivity of the Al/TIPS-pentacene/p-Si/Al diode were studied. The ideality factor and barrier height of the diode were calculated using I–V characteristics and obtained to be 1.97 and 0.65 eV, respectively. The photocurrent of the diode depends on the illumination intensity and increases with increasing photo-illumination intensity. The transient photocurrent results indicate that photocurrent under illumination is higher than the dark current and increases with increase in light intensity. The capacitance of the diode decreases with increasing frequency due to a continuous distribution of the interface states. The linear dependence of the double log plot of photocurrent and light intensity suggests that the Al/TIPS-pentacene/p-Si/Al diode could be used as an optical sensor.
► Al/TIPS-pentacene/p-Si/Al Schottky diode was fabricated using spin coating.
► The ideality factor was calculated to be 1.97.
► Transient photoconductance measurements show that the diode is sensitive to light.
► The fabricated diode could be used as an optical sensor.
Journal: Synthetic Metals - Volume 161, Issues 21–22, November–December 2011, Pages 2355–2360