Effect of aggregates on the diffusion properties and microstructure of cement with slurried silica fume based materials

Diffusivity of cement-based materials is an important factor regarding durability and the service life prediction of concrete structures. The present research focuses on investigating the influence of aggregates on tritiated water diffusivity of cement-based materials containing slurried silica fume. Effective diffusion coefficients of mortars with several sand volume fractions varying from 0 to 65% were determined by through-out diffusion tests. Microstructure was examined by scanning electron microscopy associated to energy dispersive spectrometry analysis, thermogravimetric analysis, water and mercury porosimetry, and BET adsorption analysis. It was found that large agglomerated particles of silica fume observed in cement paste and mortar with a low sand content (here 10%), reduce pozzolanic reactivity and thus affect the effectiveness of silica fume on the materials sustainability parameters. The clusters present in these formulations are mainly due to the interaction of silica fume with calcium hydroxide of the mixing solution and not to the initial state of the slurry, which was well stirred and whose particles size were checked before use. However, the presence of high content of aggregates (more than 30% of sand volume fraction) during mortar's mixing improves the dispersion of slurried silica fume particles and helps to ‘shear’ and break up agglomerates of silica fume providing a better homogenization of the material and improving the microstructural and diffusivity parameters. The addition of superplastizer in mortars with more than 50% sand content may also participate in dispersing silica fume.