کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1458568 | 989579 | 2016 | 7 صفحه PDF | دانلود رایگان |
We report on a fiber laser annealing process for brush-painted ITO nanoparticles, for use as transparent anodes in cost-efficient printable organic solar cells (OSCs). By simple brushing of ITO nanoparticle ink onto glass substrates followed by direct fiber laser annealing, we fabricated solution-processed ITO anodes with a sheet resistance of 56.79 Ω/square and an optical transmittance of 85.77%. The electrical, optical, and structural properties of ITO nanoparticle electrodes were investigated as a function of laser scan speed under a nitrogen ambient. In addition, the detailed microstructure of the laser-annealed ITO electrode was examined to explain the conduction mechanism. OSCs fabricated on laser-annealed ITO electrodes exhibit an open circuit voltage of 0.59 V, short circuit current of 9.02 mA/cm2, fill factor of 53.30%, and power conversion efficiency of 2.81%. Successful operation of those OSCs with laser-annealed ITO electrode indicates that fiber laser annealing is a simple and cost-effective option to replace conventional energy-intensive furnace-based annealing processes.
Figure optionsDownload as PowerPoint slide
Journal: Ceramics International - Volume 42, Issue 12, September 2016, Pages 13983–13989