کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1460171 | 989601 | 2015 | 9 صفحه PDF | دانلود رایگان |
The relationship between structural behaviour of sputtered TiC/amorphous C (TiC/a:C) thin films and corrosion properties was measured in three various pH solutions (0.5 M NaCl (pH=6); 0.1 M HCl (pH=1); and 0.1 M NaOH (pH=13)). The ~400 nm thick nanocomposites were deposited by DC magnetron sputtering on different substrates (Ti6Al4V alloy and CoCrMo alloy) in argon at 25 °C and 0.25 Pa with 150 W input power of carbon target and 50 W input power of titanium target. The structure and composition of nanocomposites were investigated by Transmission and Scanning Electron Microscopy. In both samples the structural investigations confirmed columnar structure of TiC/a:C films with 25–50 nm sized cubic TiC. These columns were separated by 2–3 nm thin amorphous carbon layers. TiC/a:C /Ti6Al4V alloy implant material showed better corrosion resistance than the TiC/a:C/CoCrMo alloy in 0.5 M NaCl solution based on results of the Electrochemical Impedance Spectroscopy. For both samples, the 0.1 M NaOH solution was the most corrosive media.
Journal: Ceramics International - Volume 41, Issue 4, May 2015, Pages 5863–5871