Room temperature preparation of high performance AZO films by MF sputtering

Aluminum-doped zinc oxide (AZO) thin films have been deposited by MF magnetron sputtering from a ceramic oxide target without heating the substrates. This study has investigated effects of sputtering power on the structural, electrical and optical properties of the AZO films. The films delivered a hexagonal wurtzite structure with (002) preferential orientation and uniform surface morphology with 27–33 nm grain size. The results indicate that residual stress and grain size of the AZO films are dependent on sputtering power. The minimum resistivity of 7.56×10−4 Ω cm combined with high transmittance of 83% were obtained at deposited power of 1600 W. The films delivered the advantages of a high deposition rate at low substrate temperature and should be suitable for the fabrication of low-cost transparent conductive oxide layer.