Thermal shock behavior of nano-sized ZrN particulate reinforced AlON composites

Aluminum oxynitride (AlON) has been considered as a potential ceramic material for high-performance structural and advanced refractory applications owing to its excellent stability and mechanical properties such as high rigidity and good chemical stability. Thermal shock resistance is a major concern and an important performance index of refractories and high-temperature ceramics. While zirconium nitride (ZrN) particles have been proven to improve mechanical properties of AlON ceramic, the thermal shock behavior has not been evaluated yet. The aim of this investigation was to identify the thermal shock resistance and underlying mechanisms of hot-pressed 2.7% ZrN–AlON composites by a water-quenching technique over a temperature range between 225 °C and 275 °C. The residual strength and Young's modulus after thermal shock decreased with increasing temperature range and thermal shock times due to large temperature gradients and thermal stresses caused by abrupt water-quenching. The presence of nano-sized ZrN particles exhibited a positive effect on the improvement of both residual strength and critical temperature difference of AlON ceramic due to the toughening effects, the higher thermal conductivity of ZrN, the refined grain size and the reduction of porosity. Different toughening mechanisms including crack deflection, crack bridging and crack branching were observed during thermal shock experiments, thus effectively enhancing the crack initiation and propagation resistance and leading to a considerable improvement in thermal shock resistance in the ZrN–AlON composites.