Low temperature production of glass ceramics in the anorthite–diopside system via sintering and crystallization of glass powder compacts

The production of glass ceramics (GCs) with theoretical anorthite–diopside (An–Di) weight ratios of 60/40, 50/50 and 45/55 via sintering and crystallization of glass powder compacts was investigated at different temperatures between 800 and 950 °C. The investigated compositions are located in the cross-section of the ternary fluorapatite–An–Di system close to An–Di binary joint, with constant fluorapatite content of 4.8 wt.%. Two different groups of glass powders, with mean particle size of 2 and 10 μm, were used. The experimental results showed that sintering is almost complete at 800 °C, preceding crystallization, which takes place via surface crystallization mechanism. The properties values of the produced GCs, which are the best for the composition close to An–Di eutectic line, are discussed with respect to the evolution of crystalline phases and the microstructure over increasing firing temperature. Under the technology perspective, the investigated processing route is significantly superior in comparison to the attempts reported in earlier studies.