Gelcasting of alumina foams using agarose solutions

Aqueous gelcasting of dense or cellular ceramics by using biopolymers as gel-formers, instead of monomers, is a promising technology mainly in terms of environmental aspects. The main difficulty of using biopolymer solutions in processing of cellular ceramics by foaming method is their high viscosity, which prevents the foaming capacity of the ceramic suspension. In this work, the procedure for preparing concentrated agarose solutions (4 wt.%) by dissolving under overpressure conditions was evaluated for the gelcasting of alumina foams, and the rheological behaviour of alumina suspensions containing agarose was studied. The viscosity of the gelling solution obtained under overpressure conditions was lower than that prepared by simply heating at 90 °C, thus providing high foaming capacity of the alumina suspensions and consequently manufacturing of highly porous ceramics (86–90%). The microstructure of alumina foams was typically composed of approximately spherical cells interconnected by circular windows. The use of different agarose concentrations in alumina suspensions effected the rheological conditions, which resulted in changes in the pore and window sizes of the resulting ceramics. Depending on agarose concentration (0.50–1.0 wt.% on a dry solids basis) in the starting (35 vol.%) alumina slurry, the mean pore size ranged from 529 to 375 μm, while the mean window size varied from 113 to 77 μm.