کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1464993 | 989677 | 2006 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Differential sintering of Al2O3/ZrO2-Ni composite, during pulse electric current sintering
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Powder mixtures of Al2O3, ZrO2, Ni were sintered by pulse electric current sintering at 1300 °C with a heating rate of 200 °C/min or 130 °C/min. Large ZrO2-Ni agglomerates are formed within the Al2O3 matrix after sintering. Depending on the heating rate, these agglomerates formed networks within the matrix. The networks are heterogeneously distributed in the specimens prepared by the heating rate of 200 °C/min but homogeneously in the specimens prepared by the heating rate of 130 °C/min. The microstructure evolution of the specimen prepared by the heating rate of 200 °C/min indicates that the temperature at the edge of the specimen is higher than that at the center. The temperature difference is smaller for the specimen prepared by the heating rate of 130 °C/min. The small ZrO2 particles tend to associate with nickel melt to form ZrO2-Ni agglomerates. Then the ZrO2-Ni agglomerates are migrated by magnetic field that induced by the pulse electric current.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ceramics International - Volume 32, Issue 3, 2006, Pages 241-247
Journal: Ceramics International - Volume 32, Issue 3, 2006, Pages 241-247
نویسندگان
Dongming Zhang, Lianmeng Zhang, Zhengyi Fu, Jingkun Guo, Wei-Hsing Tuan,