Flexural creep behavior of discontinuous thermoplastic composites: Non-linear viscoelastic modeling and time–temperature–stress superposition

Flexural creep behavior of nylon 6/6, polypropylene and high-density polyethylene long fiber thermoplastic (LFT) composites was studied according to ASTM D-2990. Neat polymers were tested for baseline data and compared with the 40 wt.% E-glass reinforced LFTs, all processed by compression molding. All materials exhibited non-linear viscoelasticity and showed a succession in creep resistance consistent with static flexural yield strength. A four parameter empirical model used for short fiber thermoplastics (SFT), proposed by Hadid et al., was found to provide an excellent fit to the experimental data. Time-compliance data from flexural creep and dynamic mechanical analysis (DMA) were combined to utilize short-term flexural creep tests to predict lifetime of the composites. A time–temperature–stress superposition (TTSSP) procedure was used, where stress-based vertical shifts were applied in addition to horizontal shifts used in a traditional time–temperature superposition (TTSP). Master curves obtained by this method projected the long-term creep properties, the order of creep resistance being consistent with the flexural creep data.