کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1467747 | 990116 | 2008 | 9 صفحه PDF | دانلود رایگان |

Process-induced residual stress arises in polymer composites as a result of mismatched resin contraction and fiber contraction during the cure stage. When a curved shell-like composite part is de-molded, the residual stress causes the spring-in phenomenon, in which the enclosed angle of the part becomes smaller than the angle of its mold. In this paper, a new approach is presented to control and reduce the spring-in angle by infusing a small amount of carbon nanofibers (CNFs) together with liquid resin into the glass fiber preform using vacuum assisted resin transfer molding (VARTM) process. The experimental results showed that the spring-in angles of the L-shaped composite specimens were effectively restrained by the CNFs. An analytical model and a 3-D FEA model were developed to predict the spring-in phenomenon and to understand the role of CNFs in reducing the spring-in angle. The models agreed with the experimental results reasonably well. Furthermore, the analytical model explains how the CNF-enhanced dimensional tolerance control is accomplished through the reductions in the matrix’s equivalent coefficient of thermal expansion and linear crosslinking shrinkage.
Journal: Composites Part A: Applied Science and Manufacturing - Volume 39, Issue 5, May 2008, Pages 834–842