کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1468543 | 1510004 | 2015 | 10 صفحه PDF | دانلود رایگان |
• Simple electrochemical method is utilised to fabricate super-hydrophobic layer.
• Deliquesced NaCl particle can slip off the inclined super-hydrophobic layer.
• Super-hydrophobic layer resists corrosion of substrate with efficiency of 99.99%.
• The as-fabricated layer presents good adherence to substrate and abrasion resistance.
Super-hydrophobic aluminium oxide layers were fabricated on aluminium surface with a simple anodisation method followed by fluorination treatment. It is proven that deliquesced NaCl particle can easily slip off the as-fabricated super-hydrophobic layer with low inclination angle for its low attraction to the layer. The super-hydrophobic layer can reduce corrosion of aluminium with an inhibition efficiency of 99.99%. Scotch tape test and Scratch test results indicated that the super-hydrophobic layers show good adherence to the substrate and abrasion resistance. These results demonstrate the advantages of the as-fabricated super-hydrophobic layer as a barrier to marine atmospheric corrosion.
Journal: Corrosion Science - Volume 91, February 2015, Pages 287–296