Corrosion protection of magnesium AZ31 alloy using poly(ether imide) [PEI] coatings prepared by the dip coating method: Influence of solvent and substrate pre-treatment

In this study, investigations on the protectiveness of poly(ether imide) coatings against corrosion of magnesium AZ31 alloy sheets are performed. The coatings were prepared in different pre-treated substrates by the dip coating method using N′N′-dimethyl acetamide (DMAc) and N′-methyl pyrrolidone solutions. The optimal performance was obtained for hydrofluoric acid treated substrates coated using DMAc solution (coating thickness 13 μm) which showed impedances in the order of 107 Ω cm2 even after more than 3300 h of exposure to a 3.5 wt.% NaCl solution. This high performance is associated to an acid–base interaction at the interface as observed by X-ray photoelectron spectroscopy.

Research highlights
► Detailed description of the influence of solvent on the coating performance.
► Detailed description of the influence of substrate on the coating performance.
► Reports a very protective system for the alloy.
► Describes an interesting acid-base interaction at the interface.