کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1470022 | 990315 | 2011 | 8 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Stress corrosion cracking of uni-directionally cold worked 316NG stainless steel in simulated PWR primary water with various dissolved hydrogen concentrations Stress corrosion cracking of uni-directionally cold worked 316NG stainless steel in simulated PWR primary water with various dissolved hydrogen concentrations](/preview/png/1470022.png)
Stress corrosion cracking growth rate of uni-directionally cold-rolled 316L stainless steel was monitored in simulated PWR primary water with different dissolved hydrogen (DH) concentrations at 320 °C. Crack growth rate at a DH of 0.16 cm3 (STP) H2/kg H2O is close to that at 5 cm3 (STP) H2/kg H2O. Crack growth rate at 30 cm3 (STP) H2/kg H2O is about one fourth of that at 5 cm3 (STP) H2/kg H2O or two times of that at 50 cm3 (STP) H2/kg H2O. Electron back scattering diffraction results show typical intergranular SCC along high angle boundaries with high levels of deformation.
► Dissolved hydrogen effect on SCC growth rate of cold worked low-carbon stainless steels.
► Inter-dependence between cold work and the effect of electrochemical corrosion potential on SCC growth rate.
► Cracking path related to local deformation at grain boundaries.
Journal: Corrosion Science - Volume 53, Issue 8, August 2011, Pages 2558–2565