Corrosion and corrosion control of mild steel in concentrated H2SO4 solutions by a newly synthesized glycine derivative

A newly synthesized glycine derivative (GlyD1), 2-(4-(dimethylamino)benzylamino)acetic acid hydrochloride, was used to control mild steel corrosion in 4.0 M H2SO4 solutions at different temperatures (278–338 K). Tafel extrapolation, linear polarization resistance (LPR) and impedance methods were used to test corrosion inhibitor efficiency. An independent method of chemical analysis, namely ICP-AES (inductively coupled plasma atomic emission spectrometry) was also used to test validity of corrosion rate measured by Tafel extrapolation method. Results obtained were compared with an available glycine derivative (GlyD2) and glycine (Gly). Tafel polarization measurements revealed that the three tested inhibitors function as mixed-type compounds. The inhibition efficiency increased with increase in inhibitor concentration and decreased with temperature, suggesting the occurrence of physical adsorption. The adsorptive behaviour of the three inhibitors followed Temkin-type isotherm and the standard free energy changes of adsorption (ΔGadso) were evaluated for the three tested inhibitors as a function of temperature. The inhibition performance of GlyD1 was much better than those of GlyD2 and Gly itself. Results obtained from the different corrosion evaluation techniques were in good agreement.

Figure optionsDownload as PowerPoint slideResearch highlights
► GlyD1 exhibits inhibiting properties more than GlyD2 and Gly.
► Inhibition efficiency increases with inhibitor concentration.
► Inhibition efficiency decreases with temperature, suggesting physical adsorption.
► Validation of corrosion rates measured by Tafel extrapolation method is confirmed.