کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1474915 991105 2010 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Confocal fluorescence microscopy in alumina-based ceramics: Where does the signal come from?
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
Confocal fluorescence microscopy in alumina-based ceramics: Where does the signal come from?
چکیده انگلیسی

Confocal Cr3+ fluorescence microscopy is an ideal technique for investigating residual stresses in alumina-based ceramics. Due to their transparency, however, it is important to understand where the collected signal comes from by characterising the probe response function (PRF). Here, a PRF is proposed that captures all the relevant physical effects, including a newly identified consequence of scattering by pores and grain boundaries. The new PRF describes the response of a range of alumina-based ceramics to depth scanning in a high resolution confocal fluorescence microscope in a manner that balances physical significance with the accuracy of empirical fitting. The results showed that measurements could be made deep within single crystals of sapphire and ruby, although refraction degraded the depth resolution from about 3 μm at the surface to 25 μm at a depth of 500 μm. Scattering and absorption limited the depth to which polycrystalline alumina could be probed to ∼15 μm. This was further reduced to ∼4 μm for an alumina–10 vol.% SiC nanocomposite. However, the absorption increased the accuracy of near surface measurements in these materials by preventing contamination from subsurface fluorescence.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of the European Ceramic Society - Volume 30, Issue 3, February 2010, Pages 641–648
نویسندگان
, ,