The AMWCNTs supported porous nanocarbon composites for high-performance supercapacitor

• The AMWCNTs supported porous nanocarbon composites were prepared.
• The composites have good conductivity and large BET specific surface areas.
• The composites had shown high specific capacitance, and good stability.

The porous nanocarbons supported by acid-treated multiwall carbon nanotubes (PC@ACNTs) were prepared by the combination of the hydrothermal polymerization of glucose on ACNTs, carbonization under N2 protection and final activation with ZnCl2. The materials were characterized by transmission electron microscopy, X-ray powder diffraction and Raman spectra. The results indicated that the ACNTs distributed uniformly into the framework of the porous carbon. The composites showed the high BET specific surface area up to 1712 m2 g−1 and good conductivity. The electrochemical measurements indicated that the composites processed good performances for electrochemical energy storage (210 F g−1 at 0.5 A g−1), and high stability (>99.9%), much higher than the corresponding ACNTs, porous carbons and the samples prepared by using raw MWCNTs as source. The good performance of PC@ACNTs composites was relative with the synergy of good conductivity of ACNTs and large specific surface areas of PC.

The AMWCNTs supported porous nanocarbon composites were prepared by a easy method. The composites had shown good performances for electrochemical energy storage with high specific capacitance and good stability.Figure optionsDownload as PowerPoint slide