کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1490198 | 992319 | 2012 | 10 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Preparation of surface modified zinc oxide nanoparticle with high capacity dye removal ability Preparation of surface modified zinc oxide nanoparticle with high capacity dye removal ability](/preview/png/1490198.png)
In this paper, the surface modification of zinc oxide nanoparticle (ZON) by amine functionalization was studied to prepare high capacity adsorbent. Dye removal ability of amine-functionalized zinc oxide nanoparticle (AFZON) and zinc oxide nanoparticle (ZON) was also investigated. The physical characteristics of AFZON were studied using Fourier transform infrared (FTIR), scanning electron microscopy (SEM) and X-ray diffraction (XRD). Acid Blue 25 (AB25), Direct Red 23 (DR23) and Direct Red 31 (DR31) were used as model compounds. The effect of operational parameters such as dye concentration, adsorbent dosage, pH and salt on dye removal was evaluated. The isotherm and kinetic of dye adsorption were studied. The maximum dye adsorption capacity (Q0) was 20 mg/g AB25, 12 mg/g DR23 and 15 mg/g DR31 for ZON and 1250 mg/g AB25, 1000 mg/g DR23 and 1429 mg/g DR31 for AFZON. It was found that dye adsorption followed Langmuir isotherm. Adsorption kinetic of dyes was found to conform to pseudo-second order kinetics. Dye desorption tests (adsorbent regeneration) showed that the maximum dye release of 90% AB25, 86% for DR23 and 90% for DR31 were achieved in aqueous solution at pH 12. Based on the data of the present investigation, it can be concluded that the AFZON being an adsorbent with high dye adsorption capacity might be a suitable alternative to remove dyes from colored aqueous solutions.
Figure optionsDownload as PowerPoint slideHighlights
► Amine-functionalized zinc oxide nanoparticle (AFZON) was synthesized.
► Isotherm and kinetics data followed Langmuir isotherm and pseudo-second order kinetic model, respectively.
► Q0 of ZON for AB25, DR23 and DR31 was 20, 12 and 15 mg/g, respectively.
► Q0 of AFZON for AB25, DR23 and DR31 was 1250, 1000 and 1429 mg/g, respectively.
► AFZON was regenerated at pH 12.
Journal: Materials Research Bulletin - Volume 47, Issue 7, July 2012, Pages 1800–1809