Adsorption properties of carbonized polyacrylonitrile deposited on γ-alumina and silica gel by precipitation polymerization

The precipitation polymerization method was used for the deposition of various contents of polyacrylonitrile on two oxide-type supports (γ-alumina and silica gel). The synthesized materials were characterized by thermal analysis performed in inert and oxidizing atmospheres. The mechanism of polyacrylonitrile decomposition was proposed. In order to gain effective adsorbents of volatile organic compounds the polyacrylonitrile/support composites were carbonized at elevated temperatures. The texture and morphology of the calcined materials were examined by low-temperature sorption of N2 and scanning electron microscopy, respectively. An influence of thermal treatment conditions and carbonaceous species loading on adsorption capacity of methyl-ethyl ketone vapour was also determined. Attenuated total reflection Fourier transform infrared spectroscopy measurements revealed that the ladder-type polyacrylonitrile species formed above 250 °C and stable up to about 350–400 °C are the most effective sites for methyl-ethyl ketone sorption. The carbonaceous species dispersion was found to be an additional factor influencing the adsorption capacity of the carbonized polyacrylonitrile/support composites.