کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1492183 | 1510728 | 2005 | 10 صفحه PDF | دانلود رایگان |

Piezoelectric powders and ceramics with the composition of Pb0.95Sr0.05(Zr0.52Ti0.48)O3–Pb(Zn1/3Nb2/3)O3–Pb(Mn1/3Sb2/3)O3 (PZT–PZN–PMS) were prepared by molten salt synthesis (MSS) and conventional mixed-oxide (CMO) methods, respectively. The influence of synthesis process on the properties of powders and ceramics were investigated in detail. The results show that the MSS method significantly improved the sinterability of PZT–PZN–PMS ceramics, resulting in an improvement of dielectric and piezoelectric properties compared to the CMO method. The optimum values of MSS samples are as follows: ɛr = 1773; tan δ = 0.0040; Tc = 280 °C; d33 = 455 pC/N; kp = 0.70; Qm = 888; Ec = 10.3 kV/cm; and Pr = 28.2 μC/cm2, at calcination of 800 °C and sintering of 1120 °C temperature.
Journal: Materials Research Bulletin - Volume 40, Issue 12, 8 December 2005, Pages 2110–2119