کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1502408 | 993419 | 2006 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microwave sintering of poly-ether-ether-ketone (PEEK) based coatings deposited on metallic substrate
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In this paper, the feasibility of microwave (MW) sintering PEEK (poly-ether-ether-ketone) based coatings was investigated. Three coatings were studied: pure PEEK, micron-SiC and nano-SiC particles filled (wt.10%) PEEK coatings. The results indicate that, for the two composite coatings, the SiC particles distributed in the polymer matrix, as a good MW susceptor, could be heated preferentially by MW radiation. Consequently, the polymer matrix was heated by these particles.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Scripta Materialia - Volume 55, Issue 7, October 2006, Pages 621–624
Journal: Scripta Materialia - Volume 55, Issue 7, October 2006, Pages 621–624
نویسندگان
G. Zhang, S. Leparoux, H. Liao, C. Coddet,