کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1502423 | 993420 | 2009 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Production of TiNi amorphous/nanocrystalline wires with high strength and elastic modulus by severe cold drawing
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The microstructure and properties of Ti–50.9 mol.% Ni wires after severe cold drawing were studied. X-ray diffractometry, transmission electron microscopy and electrical resistivity measurements revealed that the amorphous phase was dominant in the as-drawn wires. Young’s modulus depended strongly on the drawing reduction. The amorphous/nanocrystalline wires after 70% reduction exhibit high tensile strength (>2 GPa), a high Young’s modulus (71 GPa) and a large pseudoelastic recovery strain (∼3%). The recovery strain was further improved to 5.8% by aging at 573 K.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Scripta Materialia - Volume 60, Issue 9, May 2009, Pages 749–752
Journal: Scripta Materialia - Volume 60, Issue 9, May 2009, Pages 749–752
نویسندگان
Koichi Tsuchiya, Yasufumi Hada, Tamotsu Koyano, Kiyomi Nakajima, Masahito Ohnuma, Tadahiro Koike, Yoshikazu Todaka, Minoru Umemoto,