کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1533059 | 1512543 | 2016 | 6 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Conformal dome aberration correction by designing the inner surface Conformal dome aberration correction by designing the inner surface](/preview/png/1533059.png)
The ray transmission models of optical domes were established, and the characteristics of the rays while passing through a hemispherical dome and a conformal dome were comparatively analysed. Acquiring the minimum deviated angles from the inner surface of the conformal dome was then determined to be the designing goal for reducing the dynamic aberrations. Based on this, the inner surface of the conformal dome was optimized and thus, the dynamic aberrations were reduced. Finally, a completely cooled conformal optical system was designed. The results show that the optical system have produced good imaging quality within all the fields of regard, which further illustrates that designing the inner surface of a conformal dome is an effective method for aberration correction.
Journal: Optics Communications - Volume 380, 1 December 2016, Pages 15–20