Analysis of Ti:LiNbO3 zero-gap directional coupler for wavelength division multiplexer/demultiplexer

For the purpose of multichannel integrated-optical wavelength division MUX/DEMUX design, the wavelength tuning method of Ti:LiNbO3 zero-gap directional coupler is analysed by effective-index based matrix method (EIMM). In this method, first, the 2D refractive index profile of the Ti:LiNbO3 zero-gap directional coupler is transformed into lateral 1D effective-index profile by WKB method. Finally, matrix method is applied to this effective-index profile and the propagation constants are computed from the resonance peaks of the excitation efficiency versus propagation constant characteristics. It has been shown that the channel wavelength tuning can be achieved by varying the Y-branching angle at the input and output of the device or by a slight variation of two-mode-section length. The method of electro-optic fine tuning of the channel wavelength and channel separation of the device has also been investigated. A cascaded structure with proper parameters for four-channel application is also simulated and the results are presented.