High repetition rate laser pulses amplified by Nd/Cr:YAG ceramic amplifier under CW arc-lamp-light pumping

Laser pulses with high repetitive rate generated from a Q-switch microchip Nd:YAG oscillator were amplified by Active mirror composed of Nd/Cr:YAG ceramic pumped by CW arc-lamp. The laser pulses were amplified, and saturation of averaged output laser power was observed. Repetitive ratio of injected laser pulses was changed from 20 to 100 kHz. Averaged output laser power and gain were measured, and gain coefficient and power-extraction efficiency were evaluated. Output laser power was calculated and compared to experimentally measured one, and the calculated results are consistent with the experimental ones. For amplification of laser pulses with high repetitive ratio, this laser material can realize very high laser gain with low pumping power density and high optical–optical conversion efficiency under CW-lamp-light pumping.