1 × N add-drop filter structures using one dense wavelength division multiplexing thin-film filter

This paper proposes 1 × N add-drop filter structures in which only one thin-film filter (TF) is used. Our key idea is based on a combination of an angle-multiplexing concept and the flexibility of the optical fiber to allow a multiwavelength optical beam hit the TF several times, each time at a different angle but same position. Due to the TF angle sensitivity, the desired wavelength optical beam corresponding to the incident angle is therefore spatially isolated from the main optical beam. Our first TF-based 1 × N add-drop filter structure is arranged in a reflective design in which N wavelength optical beams can be dropped out from the main channel. For our transmissive architecture, N − 2 channels are directed to their associated output terminals while the remaining λN−1 and λN wavelength optical beams are sent out at the same port. Experimental proof of concept for our reflective TF-based 1 × 3 add-drop filter using one off-the-shelf TF, a triple fiber-optic collimator, and an optical circulator separates two wavelength optical beams with their channel spacing of 0.8 nm from the main channel. In this case, measured optical losses of 0.67 dB, 1.66 dB, and 2.59 dB are obtained for the first, the second, and the remaining dropped wavelength optical beams, respectively. Optical crosstalk and polarization dependent loss of <−18 dB and <0.08 dB are also investigated, respectively.