Correlations for natural convective heat exchange in CPC solar collector cavities determined from experimental measurements

A detailed experimental study was undertaken to analyse the natural convective heat transfer in CPC cavities, a complex function of collector orientation, geometrical aspect ratios and thermal boundary conditions at the enclosure walls. Results are reported for CPC solar collectors with full-, three quarter- and half-height reflectors, CR = 2 and a 100 mm wide flat plate absorber. Experiments were conducted using a purpose built solar simulator under controlled lab environment employing realistic boundary and thermal conditions. The effects of simultaneous tilting of the solar collectors about both transverse and longitudinal axes, truncation of the reflector walls and inlet water (collector heat removal fluid) temperature on the natural convective heat flow characteristics inside the CPC cavity have been determined. It is concluded that the correlations developed for prediction of natural convection characteristics in rectangular, annuli and V-trough enclosures are not appropriate for application to CPC solar collectors with divergence ranging from 150% to 300%. Based on the experimental data a correlation is presented to predict the natural convection heat loss from the absorber plate of solar collectors for a range of water inlet temperatures.

► Experimental analysis of natural convective heat transfer in CPC cavities (CR = 2).
► Three-dimensional distribution of the cavity air temperature.
► Nu increased by 49–56% as the transverse tilt angle increased from 0° to 40°.
► Correlations for rectangular, annuli & V-trough cavities not appropriate for CPCs.
► New correlation for the natural convective heat loss in CPC cavities is proposed.