A 3D CAD-based simulation tool for prediction and evaluation of the thermal improvement effect of passive cooling walls in the developed urban locations

As a passive cooling strategy aimed at controlling increased surface temperatures and creating cooler urban environments, the authors have developed a passive cooling wall (PCW) constructed of moist void bricks that are capable of absorbing water and which allow wind penetration, thus reducing their surface temperatures by means of water evaporation. Passive cooling effects, such as solar shading, radiation cooling and ventilation cooling can be enhanced by incorporating PCWs into the design of outdoor or semi-enclosed spaces in parks, pedestrian areas and residential courtyards. The purpose of the present paper is to detail the development of a 3D CAD-based simulation tool that can be used to predict and evaluate the thermal improvement effect in urban locations where PCW installation is under consideration. Measurement results for the surface reduction effect of a PCW are introduced in the first part of the paper. In the second part, thermal modeling of a PCW is proposed based on analysis results of experimental data. Following that, a comparison study that integrates the proposed thermal modeling was conducted to validate the simulation method. In order to demonstrate the applicability of the developed simulation tool, a case study was then performed to predict and evaluate the thermal improvement effect at an actual urban location where PCWs were installed. Simulations were performed by modeling the construction location in two scenarios; one where the PCWs were composed of dry bricks, and another where the bricks were wet. The results show that, in terms of surface temperature and mean radiant temperature (MRT), this simulation tool can provide quantitative predictions and evaluations of thermal improvements resulting from the installation of PCWs.