کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1572342 | 1000678 | 2007 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Characterising the sintering behaviour of pulverised fuel ash using heating stage microscopy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Heating stage microscopy was used to investigate the sintering behaviour of pulverised fuel ash (PFA). The effect of chemical composition, heating rate, maximum temperature and metal inclusions on densification was studied. It was confirmed that dimensional changes of PFA powder compacts can be controlled by selecting appropriate conditions of sintering temperature and heating rate. It was also found that the sintering behaviour of PFA can be modified with the addition of metal inclusions. The results suggest that development of pores and microstructure of lightweight aggregates (LWA) manufactured from PFA can be controlled by changing the key sintering parameters such as temperature, time and heating rate.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Characterization - Volume 58, Issue 10, October 2007, Pages 980–988
Journal: Materials Characterization - Volume 58, Issue 10, October 2007, Pages 980–988
نویسندگان
V. Adell, C.R. Cheeseman, M. Ferraris, M. Salvo, F. Smeacetto, A.R. Boccaccini,