کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1572551 | 1000687 | 2009 | 5 صفحه PDF | دانلود رایگان |
Spray deposition is a novel process which is used to manufacture rapidly solidified bulk and near-net-shape preforms. In this paper, Al–20Si–3Cu–1 Mg alloy was prepared by spray deposition technique. The effect of Fe and Mn additions on microstructure and mechanical properties of spray-deposited Al–20Si–3Cu–1 Mg alloy was investigated. The results show that two kinds of intermetallics, i.e. δ-Al4FeSi2 and β-Al5FeSi, is formed in the microstructure of spray-deposited Al–20Si–5Fe–3Cu–1 Mg alloy. With additions of 5% Fe and 3% Mn to Al–20Si–3Cu–1 Mg alloy, the needle shape of Al–Si–Fe intermetallic phases is substituted by the particle shape of Al15(FeMn)3Si2 phases. The presence of the intermetallic phases (δ-Al4FeSi2, β-Al5FeSi and Al15(FeMn)3Si2) improves the tensile strengths of the alloy efficiently at both the room and elevated temperatures(300 °C).
Journal: Materials Characterization - Volume 60, Issue 5, May 2009, Pages 384–388