کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1572893 | 1000710 | 2008 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effects of deformation on microstructure and mechanical properties of a Cu-Al-Ni shape memory alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In Cu-11.92 wt.%Al-3.78 wt.%Ni shape memory alloy, the influence of deformation and thermal treatments on the microstructure and mechanical properties under the compression test were studied by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC). Experiments show that the mechanical properties of the alloy can be enhanced by convenient heat treatments. The alloy exhibits good mechanical properties with high ultimate compression strength and ductility after annealing at high temperature. However, it exhibits brittle fracture and dramatic strain hardening, with linear stress-strain behavior after annealing at low temperature. The changes in the mechanical properties have been linked to the evolution of the degree of order, occurrence of precipitation, and variation of the grain size. From microstructural observations, it is seen that the β1Ⲡ(18R) and γ1Ⲡ(2H) martensite phases coexist at different fractions in the undeformed and deformed states. Deformation induces the changes between the β1Ⲡand γ1Ⲡmartensites and deformation-induced martensites form at preferred orientations as mechanical twins. The β1Ⲡmartensite variants are twin-related with respect to the (1¯2¯8)18R mirror plane and a new orientation relationship for these twin variants is derived as (1¯2¯8)A⥠(1¯2¯8)C: [4¯61] A⥠[4¯61]C. Additionally, an increase in the amount of deformation causes martensite reorientation, de-twinning, and dislocation generation; also, the martensite plates are seen to have rearranged in the same orientation to be parallel with each other.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Characterization - Volume 59, Issue 7, July 2008, Pages 920-929
Journal: Materials Characterization - Volume 59, Issue 7, July 2008, Pages 920-929
نویسندگان
U. Sarı, T. Kırındı,