کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1573142 | 1514670 | 2016 | 14 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Impression creep behaviour of squeeze-cast Ca and Sb added AZ91 magnesium alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Impression creep behaviour of squeeze-cast Ca and Sb added AZ91 magnesium alloy Impression creep behaviour of squeeze-cast Ca and Sb added AZ91 magnesium alloy](/preview/png/1573142.png)
چکیده انگلیسی
Impression creep technique has been employed to investigate creep behaviour of the squeeze-cast AZ91 Mg alloy modified by the addition of Ca and/or Sb. All the modified alloys exhibit superior creep resistance than the base AZ91 alloy. The combined additions of Ca and Sb are more effective in improving creep resistance than the individual additions. Individual Ca added AZX911 results superior creep resistance than the Sb added AZY911 owing to the higher thermal stability of the Al2Ca phase in the former alloy compared to that of the Mg3Sb2 phase in the later one. The AZXY9120 alloy pertaining 2.0Ca and 0.3Sb (wt%) exhibits the best creep resistance due to reduced amount of β-Mg17Al12 phase and presence of higher amount of dense network of thermally stable Al2Ca phase at grain boundaries. Post creep microstructural observation confirms the ability of the Al2Ca phase to withstand applied high stresses at elevated temperature without undergoing significant changes in its structure. The values of stress exponents and activation energies are in the range of 4.3-6.5 and 111.9±1.1 to 114.9±3.0 kJ/mol, which concludes dislocation climb controlled by pipe diffusion is the dominant creep mechanism for all the alloys in the temperature and stress level employed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 673, 15 September 2016, Pages 332-345
Journal: Materials Science and Engineering: A - Volume 673, 15 September 2016, Pages 332-345
نویسندگان
A.K.S. Bankoti, A.K. Mondal, Hajo Dieringa, B.C. Ray, S. Kumar,