کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1573513 1514682 2016 30 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
An analytical model to predict the equivalent creep strain rate of a lattice truss panel structure
ترجمه فارسی عنوان
یک مدل تحلیلی برای پیش بینی نرخ کرنش خزش معادل یک ساختار پانل توری شبکه
کلمات کلیدی
ساختار پانل تراس مشبک، نرخ تنش خزش معادل، مدل تحلیلی،
ترجمه چکیده
ما یک مدل تحلیلی برای پیش بینی نرخ کرنش خزش معادل یک ساختار پانل تراس مدل ارائه دادیم. مدل، که به بررسی اثرات گره پیوندی و گره تقاطع تپه ها می پردازد، به خوبی با تحلیل عنصر محدود می شود. در مقایسه با مدل هاج و دانند، این مدل نتایج دقیق تر پیش بینی می کند. تغییر شکل خزش در ساختار پانل توسط خزش فولادهای عمودی موازی با بار اعمال شده کنترل می شود. نرخ کرنش خزش معادل با پنج پارامتر کلیدی شامل زاویه پانچ، زاویه برش، ضخامت الیاف، عرض و طول تعیین می شود. تغییر جزئی ابعاد تیرچه می تواند منجر به تغییرات بزرگی در میزان خزش شود. با افزایش زاویه پانچ و زاویه برش، تراکم نسبی کاهش می یابد و تنش ها در تپه ها افزایش می یابد و منجر به افزایش میزان خزش می شود. با افزایش ضخامت و عرض کانتینر، میزان خزش به دلیل افزایش تراکم نسبی و کاهش تنش در کانال کاهش می یابد. با افزایش طول کانال، افزایش خزش به علت کاهش تراکم نسبی و افزایش تنش در سد افزایش می یابد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد دانش مواد (عمومی)
چکیده انگلیسی
We developed an analytical model to predict the equivalent creep strain rate of a lattice truss panel structure. The model, which takes into account the effects of the bonded node and the intersection node of the trusses, is well validated by finite element analysis. Compared with Hodge and Dunand model, this model obtains a more accurate prediction result. The creep deformation of the panel structure is controlled by the creep of vertical trusses parallel to the applied load. The equivalent creep strain rate is determined by five key parameters including punching angle, cutting angle, truss thickness, width and length. A slight change of truss dimension can lead to a big variation of the creep rate by orders of magnitude. With the increase of punching angle and cutting angle, the relative density decreases and the stresses in the trusses increase, leading to an increase of creep rate. With the increase of truss thickness and width, the creep rate decreases because the relative density increases and the stresses in the truss decrease. As the truss length increases, the creep rate increases due to the decrease of relative density and the increase of stresses in the truss.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 661, 20 April 2016, Pages 152-159
نویسندگان
, , , , , ,