کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1575060 | 1514737 | 2014 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Tensile behavior and deformation mechanisms of ultrafine-grained aluminum processed using equal-channel angular pressing
ترجمه فارسی عنوان
رفتار کششی و مکانیزم های تغییر شکل آلومینیوم با استفاده از فشار دادن زاویه ای یکسان کانال
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
میکروسکوپ الکترونی، مشخصات مکانیکی، آلومینیوم، ساختار فوق سنگین، مرز دانه کشویی،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
چکیده انگلیسی
The structure and deformation behavior of ultrafine-grained aluminum processed by equal channel angular pressing through plastic flow at room temperature in a strain rate interval of 1.0Ã10â5-8.6Ã10â3 sâ1 have been studied. The contribution of grain boundary sliding to the overall deformation (η) was calculated using displacement of grains relative to each other in local areas of a gage length. The strength characteristics and tendency toward necking diminish when decreasing the strain rate, while elongation up to failure and η increase. Improving the ductility at low strain rates should be related to the increase in strain rate sensitivity caused by enhancing η, reaching 45% in the local areas of the neck and totaling 72% in the local areas of uniformly elongated portion. The relatively low value of the strain rate sensitivity (m=0.08) is due to the heterogeneity of grain structure in UFG aluminum.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 606, 12 June 2014, Pages 313-321
Journal: Materials Science and Engineering: A - Volume 606, 12 June 2014, Pages 313-321
نویسندگان
K.V. Ivanov, E.V. Naydenkin,