کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1575415 | 1514744 | 2014 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Constitutive prediction of the defect susceptibility of tensile properties to microporosity variation in A356 aluminum alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Constitutive prediction of the defect susceptibility of tensile properties to microporosity variation in A356 aluminum alloy Constitutive prediction of the defect susceptibility of tensile properties to microporosity variation in A356 aluminum alloy](/preview/png/1575415.png)
چکیده انگلیسی
The aim of this study is to verify the physical meaning of the defect susceptibility of tensile properties to microporosity variation in terms of the constitutive law for tensile deformation. Additionally, it aims to investigate the contributions of plastic constraint factors describing the geometric array of eutectic Si particles and micro-voids as well as of strain-related factors to the defect susceptibility of tensile properties through theoretical prediction and systematic experiments on T4-treated A356 alloy. The empirical relationship proposed in previous studies to describe defect susceptibility can be theoretically described in terms of the constitutive law, which takes into account the strain-hardening exponent, strain rate sensitivity and microporosity terms. The modified constitutive model can very accurately predict the defect susceptibility of tensile elongation, far more accurately than the original Ghosh model. The strain-hardening exponent has practical significance, affecting the defect susceptibility of tensile elongation to microporosity variation because of its additional contribution to the plastic constraint factor, whereas the strain rate sensitivity has a minor effect on the variation of defect susceptibility. The plastic constraint factor of eutectic Si particles has a relatively lower contribution to the defect susceptibility than the plastic constraint factor of micro-voids, rather slightly increasing the defect susceptibility by increasing the maximum elongation in the defect-free condition.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 599, 2 April 2014, Pages 223-232
Journal: Materials Science and Engineering: A - Volume 599, 2 April 2014, Pages 223-232
نویسندگان
Choong Do Lee, Kwang Seon Shin,