Notable size effects on very high cycle fatigue properties of high-strength steel

Very high cycle fatigue (VHCF) properties were compared between two types of specimens: enlarged specimens and our standard specimens. Fatigue tests were conducted by ultrasonic fatigue testing; the material used was commercial spring steel. All tests ended in internal fracture, with large-size effects observed, i.e., the enlarged specimens showed lower VHCF strength than the standard specimens. Most of the internal fracture origins were oxide-type inclusions that were larger in the enlarged specimens than in the standard specimens, indicating the size effect to be caused by the difference in oxide-type inclusion sizes at the origins of internal fractures. The large-size effect strongly urges the use of large specimens when conducting VHCF tests on high-strength steel. Moreover, the large-size effect implies that fatigue strength cannot in this case be determined using the conventional S–N curve approach, since the S–N curve depends on the specimen size. The evaluation of the VHCF strength thus needs two steps: an estimation of the maximal inclusion size, followed by an estimation of the VHCF strength based on the maximal inclusion size.

► Notable size effect was found in fatigue of steel exhibiting internal fracture.
► The size effect on internal fracture was much larger than that on surface fracture.
► Oxide-type inclusions were what caused the large-size effect.
► This result urged the use of large specimens in fatigue tests on high-strength steel.
► Evaluation of very high cycle fatigue considering the inclusion size were discussed.