کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1579453 | 1514831 | 2010 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of Cu on nanocrystallization and plastic properties of FeSiBPCu bulk metallic glasses
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
This study was focused on improving the plastic properties of FeSiBP bulk metallic glasses (BMGs) by adding small amount of Cu (0.1-0.6%). BMGs with significant plastic strain of up to around 3.1% and a strength of 3.3 GPa were obtained in our investigation. Multiple shear bands and related shear ledges were observed on the deformed specimen. The high plasticity is attributed to the nano-scale inhomogeneity that results from phase separation, which can hinder the propagation of shear bands, in effect promoting multiple shearing. The characteristic size of the α-Fe nanoparticles embedded in the glassy matrix changed with Cu content. Our results indicated a dependence between the plastic behavior and the size of the α-Fe nanoparticles. A higher Cu content resulted in an increase in the size of the α-Fe nanoparticles. Of all the samples tested in our investigation, the (Fe0.76Si0.096B0.084P0.06)99.9Cu0.1 alloy exhibited the best plastic properties.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 527, Issues 10â11, 25 April 2010, Pages 2598-2602
Journal: Materials Science and Engineering: A - Volume 527, Issues 10â11, 25 April 2010, Pages 2598-2602
نویسندگان
Xue Li, Hidemi Kato, Kunio Yubuta, Akihiro Makino, Akihisa Inoue,