کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1579574 | 1514829 | 2010 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
High-strength nanostructured Ti-12Mo alloy from ductile metastable beta state precursor
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
In this study, the metastable beta Ti-12Mo (wt.%) alloy was synthesized by the cold crucible levitation melting (CCLM) method and then quenched in water from the beta domain. The tensile test carried out on the as-quenched alloy showed an important ductility reaching 45% of elongation before fracture. From the as-quenched metastable beta state, non-isothermal electrical resistivity and dilatometry measurements were carried out to detect the phase transition in order to control the nanophase precipitation sequence. After heating, XRD analysis and TEM observations revealed a very fine nano-scale omega and alpha precipitation in the beta matrix. Tensile test results indicated a very high strengthening effect after appropriate thermo-mechanical treatments, which was observed particularly huge after a two-step annealing process where a tensile strength as high as around 1600Â MPa was obtained. This highly enhanced tensile strength was attributed to the complex intragranular nanostructure observed by TEM consisting of two-scale alpha nanoprecipitates inside sub-micrometer beta grains.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 527, Issues 16â17, 25 June 2010, Pages 4262-4269
Journal: Materials Science and Engineering: A - Volume 527, Issues 16â17, 25 June 2010, Pages 4262-4269
نویسندگان
F. Sun, F. Prima, T. Gloriant,