کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1579726 | 1001230 | 2010 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
3D FEM simulations for the homogeneity of plastic deformation in Al-Cu alloys during ECAP
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Equal channel angular pressing (ECAP) is a material processing method that allows very high strains to be imposed, leading to extreme work hardening and microstructural refinement. To investigate the deformation homogeneity in the transverse direction, rigid-viscoplastic 3D finite element simulations were conducted for the different numbers of ECAP passes of Al with Cu contents 0-5%. The simulation results indicated that the material on the outer side of the die channel undergoes less deformation than that in the inner side due to the formation of a corner gap. It was also found that the homogeneity increased with increasing the number of ECAP passes and the copper content due to the decrease in the size of the corner gap. To verify the 3D finite element simulation results, the microhardness homogeneity across the transverse direction of the billet was measured. The same trend was observed: the homogeneity in hardness increased with increasing the number of ECAP passes and Cu contents from 0% to 5%. The homogeneity of deformation indicated by microhardness and by FEM results was higher for route A compared with route Bc and increases with the number of ECAP passes. The homogeneity in route A was higher than that in route Bc by 10% after 2 passes up to 8 passes.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 527, Issue 6, 15 March 2010, Pages 1404-1410
Journal: Materials Science and Engineering: A - Volume 527, Issue 6, 15 March 2010, Pages 1404-1410
نویسندگان
Nahed El Mahallawy, Farouk A. Shehata, Mohamed Abd El Hameed, Mohamed Ibrahim Abd El Aal, Hyoung Seop Kim,