کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1580688 | 1514840 | 2009 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Synthesis of ultra high strength Al–Mg–Si alloy sheets by differential speed rolling
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The ultrafine-grained Al–Mg–Si alloy sheets, which were fabricated by severe plastic deformation (SPD) using a high-speed-ratio differential speed rolling (HRDSR) and subsequent low temperature aging, exhibited an ultra high strength (yield stress: 455 MPa, ultimate tensile strength: 489 MPa). The strengthening effect was impressive compared with the results obtained by using other SPD techniques. The achievement could be attributed to formation of very fine grains due to significantly increased dislocation density in solute supersaturated matrix, high Hall-Petch constant and particle strengthening gained by formation nano-scale precipitates during the low temperature aging after the HRDSR process.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 520, Issues 1–2, 15 September 2009, Pages 23–28
Journal: Materials Science and Engineering: A - Volume 520, Issues 1–2, 15 September 2009, Pages 23–28
نویسندگان
W.J. Kim, J.Y. Wang, S.O. Choi, H.J. Choi, H.T. Sohn,