کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1581203 | 1514855 | 2009 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Flow behavior of a superplastic Zn-22% Al alloy processed by equal-channel angular pressing
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
A Zn-22% Al eutectoid alloy was processed using equal-channel angular pressing (ECAP) to reduce the grain size to â¼0.8 μm. A maximum elongation of â¼2230% was recorded in tensile testing at 473 K at a strain rate of 1.0 Ã 10â2 sâ1. The significance of grain boundary sliding was evaluated by measuring the offsets in surface marker lines for samples pulled to an elongation of 30% at three different strain rates. The highest sliding contribution was recorded under testing conditions corresponding to the maximum superplastic elongation. Detailed measurements showed that relatively high sliding offsets were recorded at the Zn-Zn and Zn-Al interfaces whereas the offsets were smaller at the Al-Al interfaces. The measurements show that grain boundary sliding is a major flow process during superplastic deformation in the Zn-22% Al alloy processed by ECAP.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 503, Issues 1â2, 15 March 2009, Pages 48-51
Journal: Materials Science and Engineering: A - Volume 503, Issues 1â2, 15 March 2009, Pages 48-51
نویسندگان
Megumi Kawasaki, Terence G. Langdon,