کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1582602 | 1514871 | 2008 | 12 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Synthesis and characterization of Al/SiC and Ni/Al2O3 functionally graded materials Synthesis and characterization of Al/SiC and Ni/Al2O3 functionally graded materials](/preview/png/1582602.png)
Two-multilayered functionally graded materials (FGMs), namely aluminium–silicon carbide (Al/SiC) and nickel–alumina (Ni/Al2O3) systems are designed, synthesized and characterized considering 10, 20, 30 and 40 vol.% ceramic concentrations. Two, three and five-layered FGMs are fabricated into flat beam samples following powder metallurgy route for Al/SiC and thermal spraying technique for Ni/Al2O3 system. Apart from microstructural studies, porosity content and microhardness are also determined. Three bulk properties are evaluated for FGM characterizations, namely effective flexural strength, thermal fatigue behavior and thermal shock resistance. Progressive and appreciable enhancement in FGM performance is observed as the number of layers is increased from two to five keeping the extreme layers same. Microhardness variation across the interfaces is found to be consistent with the analytically obtained jump in the inplane stresses at the interfaces.
Journal: Materials Science and Engineering: A - Volume 487, Issues 1–2, 25 July 2008, Pages 524–535