Effect of cold rolling on microstructure and material properties of 5052 alloy sheet produced by continuous casting

The microstructure and material properties of continuous cast 5052 alloy sheet in as-received condition (as-received sheet) and laboratory cold rolled condition (lab-processed sheet) were investigated after annealing treatment. Microstructural examinations show that the cold rolling process increases the extent of centerline segregation of second-phase particles. The increase in rolling reduction results in a decrease of grain size and a more random distribution of crystallite orientations. Tensile test results indicate that all the sheets exhibit two-stage strain-hardening behavior. Cold rolling increases the total elongation and n2-value in the transverse direction of the lab-processed sheet with a thickness of 1.6 mm. However, further increase in the rolling reduction leads to an increase of UTS with a decrease of elongation and n2-value. Furthermore, from the determined forming limit curves (FLCs), it is found that the 1.6 mm thick lab-processed sheet has better stretchability than the as-received sheet, whereas further cold rolling reduces the level of FLC. The effects of cold rolling on the mechanical property and formability are discussed in terms of the microstructural changes.