Comparative study on local and global mechanical properties of 2024 T351, 2024 T6 and 5251 O friction stir welds

The effect of the microstructure heterogeneity on the global and local tensile properties of friction stir welded joints in 5251 (O temper) and AA2024 (T351 and T6 tempers) aluminium alloys has been investigated. Micro-tensile tests parallel to the welding direction have been carried out in the regions representative of the main microstructural zones. The digital image correlation technique (DIC) has been used during transverse tensile tests for mapping the strain distribution and to determine the local stress–strain curves. A 3-D finite elements model has been developed to predict the weld behaviour from the tensile curves of the individual regions of the weld.The tensile properties of the 5251 O weld are relatively homogeneous leading to high ductility and fracture in the base material. In contrast, the tensile properties of the various regions of the 2024 T351 and 2024 T6 welds are very heterogeneous and essentially controlled by the state of precipitation. The thermo-mechanically affected zone is the weakest region where the strain localises during a transverse tensile test. The 2024 T6 base material is stronger than the 2024 T351 alloy, leading to a more pronounced strain localisation during transverse tensile tests and a lower overall ductility. Local tensile data obtained by strain mapping are in good agreement with the curves obtained by micro-tensile tests, and these results can be safely used in a finite elements model to predict the behaviour of the overall weld assembly.