کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1604627 | 1516011 | 2008 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Research on the densification of W–40 wt.%Cu by liquid sintering and hot-hydrostatic extrusion
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
In this paper, a new way to make W–40 wt.%Cu composites by liquid sintering and hot-hydrostatic extrusion has been put forward, and using this method, the billets with fully densification, fine microstructure, and good properties have been successfully obtained. The experimental results show that, the relative density of cold-pressed compact is above 70%, and after liquid sintering, the relative density of the billet can be increased to 98% at the most. Then after hot-hydrostatic extrusion the relative density is up to 99.8% eventually. The specific conductance of the so-fabricated W–40 wt.%Cu composite can reaches 56%IACS after extrusion, and the Vickers-hardness reaches 144 HV.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Refractory Metals and Hard Materials - Volume 26, Issue 4, July 2008, Pages 286–289
Journal: International Journal of Refractory Metals and Hard Materials - Volume 26, Issue 4, July 2008, Pages 286–289
نویسندگان
Daren Li, Zuyan Liu, Yang Yu, Erde Wang,