کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1638847 | 1517000 | 2012 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Spheroidal microstructure formation and thixoforming of AM60B magnesium alloy prepared by SIMA process
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Spheroidal microstructure formation and thixoforming of AM60B magnesium alloy prepared by SIMA process Spheroidal microstructure formation and thixoforming of AM60B magnesium alloy prepared by SIMA process](/preview/png/1638847.png)
چکیده انگلیسی
The microstructure development in the semi-solid state of AM60B magnesium alloy prepared by strain induced melt activation (SIMA) was described. In the SIMA route, cyclic extrusion compression (CEC) and conventional compression were used to predeform as-cast AM60B, respectively. Partial remelting and thixoforming were also carried out within the semi-solid zone. The results showed that coarse-grained structure disappeared and a fine-grained structure resulted in the CEC formed alloy. However, coarse grains and recrystallized grains co-existed in the compression formed alloy. During partial remelting, the alloy treated by CEC exhibited ideal, fine microstructure, in which completely spheroidized grains contain little entrapped liquid. Polygonal grains were spheroidized to some extent but the previous irregular shape was still obvious in the compression formed alloy. The mechanical properties of the thixoformed AM60B produced by CEC plus partial remelting were better than those of the thixoformed alloy produced by compression plus partial remelting.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Transactions of Nonferrous Metals Society of China - Volume 22, Supplement 2, December 2012, Pages s435-s444
Journal: Transactions of Nonferrous Metals Society of China - Volume 22, Supplement 2, December 2012, Pages s435-s444
نویسندگان
Li-ping WANG, Wen-yong JIANG, Tian CHEN, Yi-cheng FENG, Hong-yu ZHOU, Si-cong ZHAO, Zhen-qiang LIANG, Yan ZHU,